A Study at the Workability of Ultra-High Strength Steel Sheet by Processing Maps on the Basis of DMM

Abstract

AbstractThe hot workability of the ultra-high strength steel BR1500HS has been investigated by processing maps. A series of hot deformation tensile tests were carried out on a Gleeble-3500 thermal simulator in the deformation temperature range of 773–1,223 K and strain rate range of 0.01–10 s–1. The obtained flow stress curves reveal that the peak stress increases with the rising of strain rate and decreases with the rising of temperature. Based on dynamic materials model (DMM), the processing maps at the strains of 0.05, 0.10 and 0.15 were developed, and the optimum hot working conditions were recommended as the temperature range of 1,200–1,223 K and the strain rate range of 0.01–0.1 s–1, where the peak power dissipation efficiency is about 37 % revealing the occurrence of typical dynamic recrystallization (DRX). The main instability defects are deformation twinning and micro-crack occurring mainly at the temperature range of 773–873 K with the strain rate higher than 1 s–1. In order to deeply understand the microstructure mechanisms, the Zener–Hollomon parameter is solved, and then the self-diffusion activation energy is compared with the apparent activation energy Q at different deformation temperatures and strain rates.