Horizontal gas and gas/solid jet penetration in a gas–solid fluidized bed

Abstract

In this paper, the real time, dynamic phenomena of the three-dimensional horizontal gas and gas/solid mixture jetting in a 0.3 m (12 in) bubbling gas–solid fluidized bed are reported. The instantaneous properties of the shape of the jets and volumetric solids holdup are qualified and quantified using the three-dimensional electrical capacitance volume tomography (ECVT) recently developed in the authors’ group. It is found that the horizontal gas jet is almost symmetric along the horizontal axis during its penetration. As the jet width expands, the total volume of the gas jet increases. A mechanistic model is also developed to account for the experimental results obtained in this study. Comparison of jet penetration length and width between the model prediction and ECVT experiment shows that both the maximum penetration length and the maximum width of the horizontal gas jet increase with the superficial gas velocity. When the horizontal gas jet coalesces with a bubble rising from the bottom distributor, it loses its symmetric shape and can easily penetrate into the bed. For the horizontal gas/solid mixture jet penetration in the bed, the tail of the jet at the nozzle shrinks and the jet loses its jet shape immediately when the jet reaches its maximum penetration length, which are different from the characteristics exhibited by the gas jet. The solids holdup in the core region of the gas/solid mixture jet is higher than that in the gas jet. The penetration length of the horizontal gas/solid mixture jet is also larger than that of the gas jet.