Abstract
The addition of hollow glass microspheres (HGM) to polymers to change thermal insulation and mechanical properties is widely used. In this study HGM were tested as a new construction material for photobioreactors to control irradiance and broth temperature in microalgae cultivation. The heat isolation properties of HGMs of three different densities were tested in a polymer matrix. The transmittance (5-50%) and the thermal conductivity (182.05-190.73 W/mK) of the HGM composite material were analyzed. The results were tested in a model to predict the broth temperature and the growth rate as a function of temperature and irradiance. The addition of 1.3 and 0.6 vol.% of HGM lead to an increase in the growth rate of up to 37% and a reduction in the broth temperature up to 9°C. The mechanical resistance of the composites tested is similar to the polymer matrix.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.