Abstract
A high-throughput (HT) bulk ceramic preparation process was applied to synthesize multi-compositional lead-free piezoelectric ceramics. The lead-free piezoelectric ceramic sample library with a chemical composition of 87Bi0.5Na0.5TiO3-6BaTiO3-7K0.5Na0.5NbO3 (87BNT-6BT-7KNN) were prepared to confirm the validity of the HT preparation process. The XRD pattern and surface SEM images showed great consistency of the phase and morphology of the 16 samples in the library. The mean value of dielectric constant and piezoelectric coefficient wereεr = 1848 and d33 = 14pC/N. Ferroelectric and strain properties also demonstrated a high consistency of Ps, Pr, Ec and d33* with the mean values of 25.9 μC/cm2, 3.6 μC/cm2, 0.64 kV/mm and 290 pm/V, respectively. The corresponding Coefficient of Variance (CV) values of all these parameters are quite low, which indicate that the HT method reported in this work is feasible in the discovering of new lead-free piezoelectric materials.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Materials Science and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
