High-rate fabrication of YBCO coated conductors using TFA-MOD method

Abstract

Listen

Translate article

Abstract The YBa2Cu3O7-y (YBCO) coated conductors derived from metal-organic deposition (MOD) method using the metal salts of trifluoroacetic acid (TFA) have been developed with high critical current property. The long-length YBCO coated conductors have been fabricated by multi-turn reel-to-reel system. Increasing the thickness per single coating in the multi-turn reel-to-reel system is a cost-effective technique for fabrication of the precursor films in the calcination process. In this work, we have developed a new starting solution consisting of non-fluorine salts of yttrium 4-oxopentanoate and copper 2-ethylhexanoate with focusing on increasing the thickness per single coating for a high-rate fabrication of the YBCO coated conductors by the TFA-MOD method. The critical thickness per single coating of the film fabricated from the new starting solution was 0.54 μm/coat. High critical current of 377 A/cm-width with high critical current density (3.0 MA/cm2) was obtained in the YBCO film fabricated on CeO2 buffered LaMnO3/MgO/Gd2Zr2O-7/HastelloyTM substrates using the new starting solution at the thickness per single coating of 0.42 μm/coat.