Highly Stable Inorganic Lead Halide Perovskite toward Efficient Photovoltaics.

Abstract

ConspectusOwing to the remarkable progress achieved over the past decade with research efforts from the perspectives of material synthesis, device configuration, and theoretical investigation, metal halide perovskites have emerged as a revolutionary class of light-absorbing semiconductors. The perovskite photovoltaic devices have demonstrated an impressive increase in power conversion efficiency. For single-junction perovskite solar cells, the value has risen from the initial one-digit maximum to the state-of-art record of 25.5%. Among various chemical and structural variations of perovskites, inorganic lead halides possess a more favorable operational stability and hold greater potential for perovskite/silicon tandem photovoltaics' top cells. At the initial stage of exploring all-inorganic perovskites for optoelectronic applications, many concepts, technical routes, and modification strategies were directly adopted from research on the more-developed field of organic-inorganic hybrid perovskite (OIHP). However, as understandings on inorganic perovskite deepen with research experience gained from both experimental and theoretical progression, it has been found that the difference between the asymmetric, volatile organic cations and the spherical, stable inorganic cations can lead to drastic changes on overall material properties and the subsequent device performances. In detail, the disparities reflect the crystalline and phase profiles of the material, the fabrication and passivation rationales of perovskite thin films, and the photophysics in the assembled optoelectronic devices. Therefore, the discussions of all-inorganic perovskites have their own exclusivity and are worthy of a specialized scrutinization.Here in this Account, the latest progress on the stabilization of inorganic lead halide perovskites for efficient photovoltaic applications is highlighted. A library of chemical compositions will be discussed with a focus on notable works about CsPbI3, which possesses a more favorable bandgap as a tandem to commercialized silicon solar cells. To underscore the influence of the crystal phase on the stability of inorganic perovskites, fundamental investigations regarding the chemical and physical properties, including experimental and theoretical studies, will be summarized as a means of phase control. The stability of inorganic lead halide perovskites can also be improved by the strategic introduction of external components to the light-absorbing layer, such as the incorporation of inorganic halides, organic cations, OIHPs with low dimension, etc. These strategies can synergistically improve the stability and efficiency of the fabricated devices from the perspectives of compositional tuning, dimensional engineering, surface termination, and low-dimension capping. On the basis of a careful examination and an analysis of works achieved in these categories from our group and others, we will then discuss some promising approaches toward achieving more stable and efficient photovoltaics using inorganic lead halide perovskites.