Abstract
The development of low resistance contacts to 2D transition-metal dichalcogenides (TMDs) is still a big challenge for the future generation field effect transistors (FETs) and optoelectronic devices. Here, we report a chemical doping technique to achieve low contact resistance by keeping the intrinsic properties of few layers WS2. The transfer length method has been used to investigate the effect of chemical doping on contact resistance. After doping, the contact resistance (Rc) of multilayer (ML) WS2 has been reduced to 0.9 kΩ·μm. The significant reduction of the Rc is mainly due to the high electron doping density, thus a reduction in Schottky barrier height, which limits the device performance. The threshold voltage of ML-WS2 FETs confirms a negative shift upon the chemical doping, as further confirmed from the positions of E(1)2g and A1g peaks in Raman spectra. The n-doped samples possess a high drain current of 65 μA/μm, with an on/off ratio of 1.05 × 10(6) and a field effect mobility of 34.7 cm(2)/(V·s) at room temperature. Furthermore, the photoelectric properties of doped WS2 flakes were also measured under deep ultraviolet light. The potential of using LiF doping in contact engineering of TMDs opens new ways to improve the device performance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.