Highly Sensitive and Selective Detection of Arsenic Using Electrogenerated Nanotextured Gold Assemblage.

Abstract

Arsenic is considered as a toxic heavy metal which is highly detrimental to ecological systems, and long-term exposure to it is highly dangerous to life as it can cause serious health effects. Timely detection of traces of active arsenic (As3+) is very crucial, and the development of simple, cost-effective methods is imperative to address the presence of arsenic in water and food chain. Herein, we present an extensive study on chemical-free electrogenerated nanotextured gold assemblage for the detection of ultralow levels of As3+ in water up to 0.08 ppb concentration. The gold nanotextured electrode (Au/GNE) is developed on simple Au foil via electrochemical oxidation–reduction sweeps in a metal-ion-free electrolyte solution. The ultrafine nanoscale morphological attributes of Au/GNE substrate are studied by scanning electron microscopy. Square wave anodic stripping voltammetry (ASV) response for different concentrations of arsenites is determined and directly correlated with As3+ detection regarding the type of electrolyte solution, deposition potential, and deposition time. The average of three standard curves are linear from 0.1 ppb up to 9 ppb (n = 15) with a linear regression coefficient R2 = 0.9932. Under optimized conditions, a superior sensitivity of 39.54 μA ppb–1 cm–2 is observed with a lower detection limit of 0.1 ppb (1.3 nM) (based on the visual analysis of calibration curve) and 0.08 ppb (1.06 nM) (based on the standard deviation of linear regression). Furthermore, the electrochemical Au/GNE is also applicable for arsenic detection in a complex system containing Cu2+, Ni2+, Fe2+, Pb2+, Hg2+, and other ions for the selective and sensitive analysis. Au/GNE substrate also possesses remarkable reproducibility and high stability for arsenic detection during repeated analysis and thus can be employed for prolonged applications and reiterating analyses. This electrochemically generated nanotextured electrode is also applicable for As3+ detection and analysis in a real water sample under optimized conditions. Therefore, fabrication conditions and analytical and electroanalytical performances justify that because of its low cost, easy preparation method and assembly, high reproducibility, and robustness, nanosensor Au/GNE can be scaled up for further applications.