High-contrast Compton camera: Challenges to high-quality and broadband imaging

Abstract

In the field of nuclear medicine, various radiopharmaceuticals require wideband x-ray/gamma-ray imaging devices for clinical and treatment monitoring. Compton cameras, which perform imaging using high-energy gamma rays, have the potential to significantly increase the variety of radioactive nuclides that can be imaged. However, artifacts caused by the so-called “Compton cone” have hindered their clinical use. Therefore, we propose the use of a collimator to improve the contrast of images obtained using Compton cameras. In this study, we developed a high-contrast Compton camera by attaching a tungsten collimator to its front surface. The contrast is improved by applying weighting to the signals based on the distance that the high-energy gamma rays penetrated the collimator walls. As a demonstration, we visualized 198Au plates that emit 412-keV gamma rays with and without the collimator. In addition, low-energy (<200 keV) x-ray/gamma-ray imaging, which is difficult for conventional Compton cameras, was achieved by performing single-photon emission computed tomography (SPECT) using the collimator and scatterer of the Compton camera. We demonstrated broadband gamma-ray imaging by visualizing a 133Ba standard source using 81-keV and 356-keV gamma rays based on the principles of SPECT and Compton cameras, respectively.