Abstract
AbstractThe hyperbranched polyester synthesized by “one‐step method” was grafted with stearic acid to obtain long‐chain hyperbranched polymers (LCHBPs) with a large number of long stearic acid chains at the end. By means of FTIR and 13C‐NMR characterization, it was proved that stearic acids were grafted onto hyperbranched polyesters (HBPE) to yield LCHBPs successfully. It was determined by GPC and hydroxyl value titration that the number average molecular weight of HBPE was 4.86 × 103 and the grafting rate of stearic acid was 47%. Polylactic acid (PLA)/LCHBPs blends were prepared by melt processing method. The results showed that comparing with neat PLA, the tensile strength of PLA/LCHBPs blends decreased slightly with the increase of LCHBPs, but still maintained a high level, while the elongation at break and the impact strength of the PLA with 3.0 phr LCHBPs were greatly improved by 1360.0% and 119.8%, respectively. In addition, the impacted fracture characteristics of PLA changed significantly from brittle fracture to ductile fracture after LCHBPs incorporation, with the formation of a large number of filamentous structures. Thus, LCHBPs was an excellent toughening modifier for PLA and the resulting blends with improved performance possess wider applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.