High-Throughput Energy-Efficient LDPC Decoders Using Differential Binary Message Passing

Abstract

In this paper, we present energy-efficient architectures for decoders of low-density parity check (LDPC) codes using the differential decoding with binary message passing (DD-BMP) algorithm and its modified variant (MDD-BMP). We also propose an improved differential binary (IDB) decoding algorithm. These algorithms offer significant intrinsic advantages in the energy domain: simple computations, low interconnect complexity, and very high throughput, while achieving error correction performance up to within 0.25 dB of the offset min-sum algorithm. We report on fully parallel decoder implementations of (273, 191), (1023, 781), and (4095, 3367) finite geometry-based LDPC codes in 65 nm CMOS. Using the MDD-BMP algorithm, these decoders achieve respective areas of 0.28 mm2, 1.38 mm2, and 15.37 mm2, average throughputs of 37 Gbps, 75 Gbps, and 141 Gbps, and energy efficiencies of 4.9 pJ/bit, 13.2 pJ/bit, and 37.9 pJ/bit with a 1.0 V supply voltage in post-layout simulations. At a reduced supply voltage of 0.8 V, these decoders achieve respective throughputs of 26 Gbps, 54 Gbps, and 94 Gbps, and energy efficiencies of 3.1 pJ/bit, 8.2 pJ/bit, and 23.5 pJ/bit. We also report on a fully parallel implementation of IDB for the (2048, 1723) LDPC code specified in the IEEE 802.3an (10GBASE-T) standard. This decoder achieves an area of 1.44 mm2, average throughput of 172 Gbps, and an energy efficiency of 2.8 pJ/bit with a 1.0 V supply voltage; at 0.8 V, it achieves throughput of 116 Gbps and energy efficiency of 1.7 pJ/bit.