Abstract

Hybrid GaInAsP/SOI ridge waveguide Fabry–Pérot lasers with reduced thermal resistance were fabricated and measured. The lasers were formed by room-temperature surface-activated bonding of InP and silicon-on-insulator wafers. Thin SiO2 film was introduced as ridge-sidewall insulation to increase heat flow to the p-electrode side-metal. By incorporating a thermal shunt structure and Au electroplating, a single-facet output power of 20 mW and lasing operation up to 110 °C were achieved for a cavity length of 2.0 mm under continuous-wave conditions. The proposed structure showed low thermal resistance of 14.3 K W−1 and a threshold current density of approximately 0.7 kA cm−2.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.