High temperature proton conductors based on perovskite-type oxides

Abstract

Listen

Translate article

Introduction High temperature proton conducting solids are useful materials for many electrochemical applications such as high temperature fuel cells, hydrogen sensors and hydrogen gas separators. However, many protonic conductors decompose at temperatures above 300 °C. About ten years ago, the author found that certain perovskite-type oxide solid solutions exhibit protonic conduction in an atmosphere containing hydrogen or steam at high temperatures. In this chapter, proton conduction in perovskite-type oxides and their electrochemical properties are described. Proton conducting solids at high temperature Fig. 8.1 shows the conductivities of representative protonic conductors as a function of temperature. Although there are many good proton conducting solids at low temperature, they are unstable at temperatures above 300 °C since they decompose to liberate water. In earlier work, the existence of protons in Cu 2 O, CuO, NiO, ZrO 2 4 and ThO 2 5 in a hydrogen-containing atmosphere at high temperatures was studied, and the possibility of protonic conduction in those oxides suggested. However, their protonic conductivities below 1000 °C were expected to be quite low compared to those of low temperature proton conductors. Furthermore, these studies did not provide a direct demonstration of protonic conduction. After the discovery of SrCeO 3 -based protonic conductors, KTaO 3 –based oxides and Y 2 O 3 ceramic were reported to have protonic conduction at high temperatures, although the conductivities were not as high as those of the cerate-based perovskite-type oxide ceramics.