High strength diffusion bonding of Ti2AlNb to GH4169 with (TiZrHfNb)95Al5 high entropy interlayer

Abstract

A high entropy interlayer (TiZrHfNb)95Al5 was designed for vacuum diffusion bonding of Ti2AlNb to GH4169. The influence of bonding temperature on the interfacial microstructure morphology, mechanical properties and fracture behaviour of the resultant joints was investigated. The evolution of microstructure and fracture mechanism were revealed. The typical interface microstructure of Ti2AlNb/B2/Solid solution/(Ti, Zr, Hf)2(Ni, Nb)+(Ti, Zr, Hf)(Ni, Nb)+(Ti, Zr, Hf)(Ni, Nb)2+Solid solution/(Ti, Zr, Hf)(Ni, Nb)+(Cr, Ni, Fe)ss/(Cr, Ni, Fe)ss/Cr-rich(Cr, Ni, Fe)ss/Ni-rich(Cr, Ni, Fe)ss/GH4169 was formed. As the bonding temperature increased, the thickness of interfacial reaction layer gradually increased, and the shear strength gradually increased until 980 °C, then decreased sharply. The highest shear strength reached 376 MPa at 980 °C for 90 min. The highest microhardness region of 11.79 GPa existed on the GH4169 side, which was mainly composed of (Ti, Zr, Hf)(Ni, Nb) and (Cr, Ni, Fe)ss phases. Meanwhile, the elastic modulus dramatically changed interface formed near this region. The fracture surface morphology indicated typical brittle fracture characteristics such as cleavage steps, transgranular fracture and intergranular fracture. According to the fracture analyses, major cracks initiated in the (Ti, Zr, Hf)(Ni, Nb) phase+(Ti, Zr, Hf)2(Ni, Nb) phase and gradually extended to the (Cr, Ni, Fe)ss phase. Thus, the major crack emerged region was located at the elastic modulus dramatically changed interface.