Abstract
A high-sensitivity hydraulic pressure sensor is proposed, which consists of a Fabry-Perot interferometer (FPI) filled with a polymer film of polydimethylsiloxane (PDMS). The FPI structure is fabricated by splicing a section of hollow core fiber (HCF) to the end-face of a lead-in single mode fiber (SMF). Then, the PDMS is filled into the HCF which acts as a light reflector and a diaphragm to detect external pressure variation. As a result, the length of the FPI cavity and the thickness of the PDMS are 137.8 µm and 33.8 µm, respectively. Experimental results indicate that the sensor's wavelength exhibits a linear response to the hydraulic pressure, which function is described as y = -7.35 × 10-3x + 1536.395. Here, x and y represent the hydraulic pressure and the wavelength, respectively. The pressure sensitivity is up to -7.35 nm/kPa. Besides, a temperature compensation method based on a fiber Bragg grating is proposed to eliminate the influence of temperature. Experiments show that the scheme can effectively eliminate the influence of temperature and achieve accurate measurement of hydraulic pressure.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
