Abstract
Computational thermo-fluid dynamics in the field of turbo machinery research tend to account for transient interaction mechanisms to predict the convective heat transfer within the hot gas path. In this context, the rotor hub side endwall region of the high pressure turbine depicts an object of interest as the near wall flow field may be dominated by rotating flow structures emerging from the disc space cavities. The validation of the applied numerical tools rely on experimental heat transfer setups reproducing such transient boundary conditions. This paper describes an experimental approach to quantify the heat transfer coefficient and the adiabatic wall temperature on the rotating endwall of a large scale test turbine. The wall heat flux distribution in a thin film isolator coated to a well conducting support structure is quantified for a series of quasi-isothermal boundary conditions. A high-resolution infrared camera is used to capture triggered thermograms of the rotating surface. Distributed thermocouples in the base body serve as reference points for camera calibration and to deduce the temperature distribution at the interface to the isolator. The calibration is in-situ and includes the pixel-wise quantification of uncertainties in the surface temperatures. An advanced linear fit approach is applied to derive the unknown adiabatic quantities and their uncertainties. For the examined operating point with a rim seal purge flow rate of 1% the random part of the relative measurement uncertainty is clearly below 10% for the heat transfer coefficient and below 5% for the adiabatic wall temperature. As the evaluation algorithm is designed to consider covariances between the thermocouple and infrared readings, the surface wall heat flux can be evaluated for every single infrared image.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.