High‐Resolution Field Measurement of Soil Heat Capacity and Changes in Soil Moisture Using a Dual‐Probe Heat‐Pulse Distributed Temperature Sensing Approach

Abstract

AbstractIncreasing interest in studying the variability of soil water content and its spatial scale dependency necessitates the development of new techniques to accurately monitor soil water over a wide range of spatial scales. Distributed Temperature Sensing (DTS) techniques offer unprecedented opportunities to measure temperature with a spatial resolution of a few centimeters over several kilometers, which can be used to measure soil moisture. This study is the first of its kind that investigates under field conditions the feasibility of combining the Dual‐Probe Heat‐Pulse (DPHP) technique with the DTS technology to measure soil thermal properties and variation in soil moisture. A field experiment was conducted over a 30 m transect in the Lake Wheeler Field laboratory in Raleigh, NC. Three different DPHP sensors were constructed from combinations of different fiber optic cables and heating elements and were tested to assess their performance and the effect of their construction characteristics on their accuracy. Measurements were taken over different soil moisture conditions and the system performance was compared against independent soil water content sensors. The system was able to track changes in soil water content with a mean RMSE of 0.02 m3 m−3 using the optimal DPHP sensor. The key advantage of the tested system is that it does not need any site‐specific calibrations typically required for other DTS‐based systems. The findings of this study provide some practical information and measures that need to be taken for successful DTS‐DPHP construction and application under field conditions.