High-resolution characterization and integrated study of a reservoir formation: the danian carbonate platform in the Aquitaine Basin (France)

Abstract

This paper provides an example of an integrated multi-scale study of a carbonate reservoir. The Danian Lower R2 carbonate reservoir is located in the South of the Aquitaine Basin (France) and represents a potential underground gas storage site for Gaz de France. The Danian Lower R2 reservoir was deposited as a prograding carbonate platform bordered by a reef barrier. The effects of sedimentary and diagenetic events on the reservoir properties, particularly dolomitization, were evaluated. In this study, the reservoir quality has been assessed by seismic analyses at the basin scale, by log-analysis at the reservoir scale, by petrographic methods and by petrophysical tools at the pore-core scale. Two dolomitization stages, separated by a compaction event with associated fracturing and stylolites, have been identified. These diagenetic events have significantly improved the Lower R2 carbonate reservoir properties. It is demonstrated that the reservoir quality is mainly controlled by the pore-geometry, which is determined by various diagenetic processes. The permeability values of the reservoir range over 4 orders of magnitude, from 0.1 to 5600 mD and the porosity values range between 2 and 42%. Reservoir unit 4 (a karstic dolomite) shows the best reservoir properties with average porosity values ranging between 11.1% and 19.3% and an average permeability ranging between 379 and 766 mD. Reservoir unit 2 (a fine-grained limestone) shows the worst reservoir properties. The cementation factors range from 1.68 to 2.48. The dolomitic crystal carbonate texture (mainly units 3 and 4) shows the highest value of the cementation factor (1.98–2.48) and formation factor (9.54–36.97), which is due to its high degree of cementation. The saturation exponents vary between 1.2 and 3.4. Using these experimental electrical parameters and the resistivity laterolog tool we predicted the water saturation in the various reservoir units. The permeability was predicted by combining the formation factor with the micro-geometric characteristic length. The best fit is obtained with the Katz and Thompson's model and for a constant of 1/171.