High-quality output PWM AC voltage regulator based on Cuk converter

Abstract

This paper describes the design of an AC–AC converter capable of generating a high-quality output. It is based on the Cuk configuration, with the transistors replaced by bidirectional switches. Since there are no transformers in the configuration, the converter lends itself to a compact and lightweight implementation. The design process is aimed at using, as much as possible, the tools and devices already developed for DC–DC applications. This approach greatly simplifies the design and implementation of the converter. An integrated circuit, developed for DC–DC applications, is used to control the converter. Both the set-point and the feedback signal are rectified in order to fit the input range of the controller. Tests performed show that the output exhibits a maximum total harmonic distortion of 3% (resistive load). The efficiency is slightly higher than 89%, and the average output regulation is 0.3%. The converter is capable of correcting voltage sags down to 60% and voltage swells up to 30%, with the output returning to its nominal value within one mains cycle. The results show that the converter is suitable for energizing information-processing equipment.