Abstract
A microwave oscillator topology based on CRLH (Composite Right-/Left-Handed) unit cells is analyzed theoretically and experimentally tested. The oscillator consists of a CRLH based distributed amplifier and a positive feedback realized by a simple transmission line. The oscillator has two output ports, where the power levels are practically the same. For this topology, we have found the oscillation condition and we demonstrate that each transistor gives the same contribution to the power delivered at the two output ports, in this way, the output power is maximized. The oscillator has been designed for a frequency of oscillation of 2.8 GHz and fabricated in hybrid technology, by using InGaAs HEMTs and microstrip lines. The measured powers at the two output ports are equal to 12.6 dBm and 10.4 dBm, the small difference between these values being given by the insertion loss of the gate line. The experimental frequency of oscillation is 2.77 GHz, with a difference of less than 1% in comparison with the expected value. Due to the frequency selectivity of the CRLH unit cells, numerical simulations predict low phase noise for this configuration of oscillator.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.