Abstract
To date, obtaining the high-solid-loading Al2O3 slurry and overcoming the trade-off between high solid loading and printing accuracy and strength of printed green bodies to achieve high-performance and precision Al2O3 ceramic parts by DLP 3D printing remain challenging. In this study, an Al2O3 slurry with high solid loading of 60 vol% was developed through dispersant optimisation for top-down DLP 3D printing. Graphene was innovatively introduced during slurry fabrication to decouple the printing accuracy and strength of green bodies from such high solid loading. Simultaneously, graphene addition could considerably reduce slurry fluidity, thereby facilitating its coordination with top-down DLP. With 0.07 wt% graphene addition, the dimension deviations of printed green bodies improved from 90 to 880 µm to ≤ 70 µm, and the bending strength increased by 17.75%. High-performance and precise Al2O3 ceramic components with low sintering shrinkages were prepared. The density and microhardness were 99.7% and 18.61 GPa, respectively.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
