Abstract
An in-line optical fiber Mach-Zehnder interferometer (MZI) sensor with high fringe visibility is reported. The sensor is formed by splicing a short section of four-core fiber (FCF) between two coupling sections. The coupling section is fabricated by cascading very short segment of few mode fiber, multimode fiber (MMF), and large core diameter MMF together. A maximum fringe visibility of approximately 30 dB is obtained in the transmission spectrum. The temperature and curvature sensing response were also experimentally investigated. The temperature sensitivities are 61 pm/°C and 49 pm/°C for dip A and dip B ranging from 30 °C to 80 °C, respectively. The curvature sensitivities for dip A and dip B are 20.77 nm/m−1 and 12.89 nm/m−1 in the range of 0.2983 m−1 to 0.7916 m−1, as well as 9.99 nm/m−1 and 5.38 nm/m−1 from the range of 0.7916 m−1 to 1.039 m−1, respectively. The proposed MZI sensor has the advantage of easy fabrication, compactness, higher fringe visibility, and low cost.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
