Abstract
As a type of solid waste, the used cigarette filters (UCF) were utilized to produce ester-rich bio-oil via a cleaner production process, namely, microwave-assisted pyrolysis (MAP). The pyrolysis efficiency was significantly enhanced owing to the high heating rate under MAP conditions with assistance of microwave absorber silicon carbide (SiC) in reactor and adding methanol into N2 carrier gas. Compared with the traditional tubular muffle furnace heating method yielding 0% of bio-oil, the MAP heating method obtained 29.17% of bio-oil from UCF. The bio-oil yield from UCF increased from 29.17% to 46.71% due to the introduction of methanol. Results of the gas chromatography/mass spectrometry showed that esters were the main components in the bio-oils (over 40%), especially of methyl acetate (over 12%). The aromatic compounds of phenols and polycyclic aromatic hydrocarbons (PAHs) were also produced from the MAP of UCF. The bio-char from MAP of UCF exhibited the mesoporous property (e.g., over 500 m2/g of specific surface area). It is expected to produce over 350000 metric tons ester-rich bio-oil if the proposed technology can be scaled up globally. It will be a preeminent contribution for the conversion of UCF to the cleaner production and our environments.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.