Abstract
The dielectric properties of composite films comprising poly(ether ether ketone) (PEEK) and multiwalled carbon nanotubes (MWCNTs) wrapped in poly(ether sulphone) were investigated. These wrapped-MWCNT–PEEK composite films were fabricated through melt blending and subsequent melt extrusion. At low frequencies, the dielectric constant ( k) of the composite PEEK film with 0.68 vol%-wrapped MWCNTs increased with the frequency, with the value of k being as high as 367 at 103 Hz. The wrapped-MWCNT–PEEK composite films also exhibited superior mechanical and thermal properties. In particular, the tensile strength and elongation at break values of all the composite films were greater than 103 MPa and 170%, respectively, and their 5% weight loss temperatures were higher than 575°C. This was attributable to the high conductivity of the MWCNTs, the uniform dispersion of the wrapped MWCNTs in the PEEK matrix, the strong interfacial adhesion between the wrapped MWCNTs and the PEEK, and the processing method employed, namely, melt extrusion.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
