Year-end Sale % OFF 
Abstract
Achieving both high sensitivity and wide detecting range is significant for the applications of triboelectric nanogenerator-based self-powered pressure sensors (TPSs). However, most of the previous designs with high sensitivity usually struggle in a narrow pressure detection range (<30 kPa) while expanding the detection range normally sacrifices the sensitivity. To overcome this well-known obstacle, herein, piezopotential enhanced triboelectric effect realized by a rationally designed PDMS/ZnO NWs hierarchical wrinkle structure was exploited to develop a TPS (PETPS) with both high sensitivity and wide detecting range. In this PETPS design, the piezopotential derived from the deformation of ZnO NWs enhances its tribo-charge transferring ability; meanwhile, the hierarchical structure helps to establish a dynamically self-adjustable contact area. Benefiting from these advantages, the PETPS simultaneously achieves high sensitivity (0.26 nC cm-2 kPa-1 from 1 to 25 kPa, and 0.02 nC cm-2 kPa-1 from 25 to 476 kPa), fast response (46 ms), wide sensing range (1 to 476 kPa), and good stability (over 4000 cycles). In addition, the output charge density that is independent of the speed rate of driven force was adopted as the sensing signal of PETPS to replace the commonly used peak voltage/current values, enabling it more adaptive to accurately detect pressure variation in real applications.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
