Heterojunction Engineering and Ideal Factor Optimization Toward Efficient MINP Perovskite Solar Cells

Abstract

AbstractThe pursuit of high power conversion efficiency (PCE) and cost‐effective perovskite solar cells (PSCs) has spawned many innovative device structure designs. Compared with the traditional NIP type PSCs, electron transport layer (ETL) free PSCs have attracted growing attention due to their enormous potential in large area, low‐cost flexible application. However, there is still a lack of in‐depth understanding of the energy level arrangement indium tin oxide (ITO)/perovskite interface, resulting in poor device performance. Here, a metal/insulator/n‐type perovskite/p‐type spiro‐MeOTAD (MINP) structure is proposed to elaborate on the influence of the apparent work function and contact barrier change of the metal–semiconductor (MS) and metal–insulator–semiconductor (MIS) junction on the carrier transfer and collection. Common and easily available 5‐amino‐valeric acid is inserted into the ITO/perovskite interface to form an insulating dipole layer and to ensure quasi‐ohmic contact at the front interface. Consequently, the device changes from Schottky/PN cascade heterojunction type to a single PN heterojunction device with its ideal factor decreasing from 3.35 to 2.05. Accordingly, the champion device achieves 19.37% PCE with significantly increased Voc and FF compared to the pristine device. This work provides a facile and effective method to improve the application potential of novel ETL‐free PSCs.