Hemolysis performance analysis and a novel estimation model of roller pump system

Abstract

ObjectiveHemolysis performance is a crucial criterion for roller pumps utilized in life supporting system. In this study, the factor of hemolysis for roller pumps was selected as the target, and an estimation formulation was built to evaluate its hemolysis. MethodsSeveral models were proposed and then simulated with the assistant of Computational fluid dynamics (CFD) framework. The hemolysis performance was calculated using the power law model based on CFD and the estimation model in accordance with geometry parameters proposed in this study. The results of the in vitro experiments were compared with the simulation results. Power law model with the lowest error was utilized in following analysis. ResultsAs indicated by the simulation result, the rotary speed most significantly affected the hemolysis performance of roller blood pumps, followed by roller number and diameter of tube. The index of hemolysis (IH) for roller blood pumps at a rotary speed of 20–100 rpm ranged from 8.73E-7 to 8.07E-5. The relative error of the estimation model (4.93%) was lower than of the power law model (6.78%). ConclusionThe IH led by pumps shows a significant, nonlinear relationship with the rotary speed. The design of multiple rollers design is harmful for hemolysis performance and larger diameter of tube exhibits decreased hemolysis at constant flow rate. An estimation formula was proposed with lower relative error for roller pump with the same shell set, which exhibited reduced computation and elevated convenience. And it can be utilized in hemolysis estimation of roller pumps potentially.