Abstract
Abstract The Athabasca oil sand is one of the three major bitumen deposits in northern Alberta. It contains about 80% of the Alberta total bitumen deposits. The McMurray Formation, Mannville Group, Lower Cretaceous, which contains the Athabasca oil sands bitumen deposit, covers about 46800 square kilometers at an average thickness of 60 meters. The total recoverable reserve is estimated to about 170 billion barrels, which is the second largest oil reserve after Saudi Arabia. Variation in the formation water resistivity (Rw) and difficulties to accurately estimate the shale volume (Vsh) over the heavy oil zones present a real challenge in water saturation calculation, thus in total reserves estimation. A combination of Nuclear Magnetic Resonance and Elemental Spectroscopy Technologies, with conventional logs, permitted us to quantify the different components of the heavy oil in the reservoir over the McMurray formation. The technique is to use the clay volume, directly measured with the nuclear spectroscopy tool, to discern the "visible to NMR" heavy oil component from CBW in the 2D NMR analysis. The "invisible to NMR" heavy oil component is estimated using the lithology corrected density porosity and the NMR total porosity. The total heavy oil saturation of one of the five studied wells is compared to core oil saturation and to nuclear spectroscopy oil saturation, diredctly derived from the measured carbon. Excellent matching between the three results is seen. This approach presents advantages over the classic petrophysical methods, mainly in zones with variable connate water salinity and variable clay minerals. Its application can be extended to any bitumen or heavy oil deposits and will help in reducing coring programs.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call