Abstract
This paper presents an experimentally validated computational study of heat transfer within a compact recuperated Brayton cycle microturbine. Compact microturbine designs are necessary for certain applications, such as solar dish concentrated power systems, to ensure a robust rotodynamic behaviour over the wide operating envelope. This study aims at studying the heat transfer within a 6 kWe micro gas turbine to provide a better understanding of the effect of heat transfer on its components’ performance. This paper also investigates the effect of thermal losses on the gas turbine performance as a part of a solar dish micro gas turbine system and its implications on increasing the size and the cost of such system. Steady-state conjugate heat transfer analyses were performed at different speeds and expansion ratios to include a wide range of operating conditions. The analyses were extended to examine the effects of insulating the microturbine on its thermodynamic cycle efficiency and rated power output. The results show that insulating the microturbine reduces the thermal losses from the turbine side by approximately 11% without affecting the compressor’s performance. Nonetheless, the heat losses still impose a significant impact on the microturbine performance, where these losses lead to an efficiency drop of 7.1% and a net output power drop of 6.6% at the design point conditions.
Highlights
Microgeneration power systems are gaining popularity as a result of increasing interest in the distributed power generation and the stricter emission standards [1]
The temperature distribution in this case shows the extent of the effect of heat transferred from the turbine to the rest of the Micro Gas Turbines (MGTs) parts
This paper presents the results of a thermal analysis for a 6 kWe micro gas turbine
Summary
Microgeneration power systems are gaining popularity as a result of increasing interest in the distributed power generation and the stricter emission standards [1]. Brayton cycle Micro Gas Turbines (MGTs) (to be referred to in this paper as ‘microturbines’, or MGT) are reliable machines and have the flexibility to be operated using a wide range of fuels They can be integrated in renewable energy systems, such as solar dish microturbine systems, and combined heat and power systems, such as domestic boilers [2]. Microturbines occupy a narrow place in the power generation sector globally because of their low conversion efficiency [3,4] and high capital cost. This low efficiency stems from miniaturising the turbomachinery components, which results in significantly lower aerodynamic efficiency than their larger counter parts. The aerodynamic efficiency penalty originates from the smaller blade heights, machining tolerances, larger clearance gaps to blade height ratios and the effect of operating at low Reynolds numbers
Published Version (Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have