Heat transfer characteristics of vertical condensers under unsteady boundary conditions: Dynamic modeling, experiment validation, and parametric analysis

Abstract

A dynamic model has been developed to predict the coupled heat transfer characteristics of vertical condensers under varying boundary conditions. The model predictions closely matched the experimental data, with normalized mean bias error and root mean square error metrics below 3%. It was observed that variations in the inlet temperature of the secondary-side coolant did not immediately affect the outlet coolant temperature, exhibiting a noticeable lag phase before gradually adjusting to new conditions. Even after the inlet coolant stabilized, the outlet coolant temperature continued to rise until reaching a steady state after a defined period. The dynamic changes in the condensate film thickness and local heat flux density were categorized into three stages: lag, transitional, and steady. These stages showed differing response and transition times across various locations of the condenser. The bottom of the condenser pipeline demonstrated the shortest response time for condensate film thickness variation but the longest transition time. Additionally, the study investigated the influence of geometric parameters on the dynamic response characteristics of condensers. It was found that longer condenser tubes, lower wall thermal diffusivity, and thicker condensing walls resulted in extended transition times for condensate mass flow at the condenser bottom.