Hazards associated with blue light emitted during gas metal arc welding of mild steel using various shielding gases and currents.

Abstract

Blue light emitted during arc welding is known to potentially cause photoretinopathy. To help prevent retinal injury, it is important to identify the hazards associated with various welding conditions. The present work conducted experiments involving gas metal arc welding of mild steel under various conditions, and measured the spectral radiance of the arcs. The effective radiance values, as used by the American Conference of Governmental Industrial Hygienists (ACGIH) to quantify exposure level of blue light, were subsequently calculated from the data. The resulting values were in the range of 5.0-118 W/cm2/sr, corresponding to hazardous levels according to ACGIH guidelines. The effective radiance was increased at higher welding currents and when pulsed currents were used rather than steady currents. The blue light hazard was also affected by the type of shielding gas employed. These data confirm that it is very hazardous to stare at arcs during gas metal arc welding of mild steel. As such, appropriate eye protection is necessary during arc welding, and directly staring at the arc should be avoided.