Abstract

The goal of this study was to compare the technical and economic performance of terrain chipping and roadside chipping, applied to short rotation biomass plantations. The null hypothesis was that no significant difference are in the performance of the two work systems, when applied to short rotation coppices. Those systems especially designed for non-industrial SRF plantations, were used for conventional logging operations. The difference on the above mentioned systems consisted especially in the chipping location: chipping was performed directly to the field (containers reach the chipper in the field) or at the field’s edge (roadside chipping). Both systems were tested on two of the most common SRF poplar clones in Italy, namely: AF2 and Monviso. Plots were allocated randomly to the two treatment levels ( roadside or field chipping) than blocked for two main clone types ( AF2 and Monviso ) so that each of the 4 treatments level and clone types has a minimum repetition plot of 6 times (total of 24 replications). The Plot were identified with paint markings at the stump so each plot area could be identified at the ground. Net weight of each charge was obtained by a certified weighbridge, so each plot has its own productivity in terms of weight and time consumption. Results were encouraging: harvesting cost varied from 16.3 to 23.2 􀀔 tonne-1, and was lower for terrain chipping and for the most productive clone (Monviso). Despite its higher cost, roadside chipping was preferred for its better terrain capability and for the superior storage quality of uncomminuted biomass. Both systems were suboptimal in their current configurations. They could offer a better performance, subject to minor improvements.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call