H2 sensor based on tapered optical fiber coated with MnO2 nanostructures

Abstract

A novel hydrogen (H2) sensor was developed using optical fiber coated with manganese dioxide (MnO2) nanostructures. Optical multimode fiber (MMF) of 125μm in diameter as the transducing platform was tapered to 20μm to enhance the evanescent field of the light propagates in the fiber core. The tapered fiber was coated with MnO2 nanograins synthesised via chemical bath deposition (CBD) process. Catalytic Palladium (Pd) was sputtered onto the MnO2 layer to improve the H2 detection. The sensing layer was characterized through Field Emission Scanning Electron Microscopy (FESEM), Energy Dispersive X-ray (EDX), X-ray Diffraction (XRD) and Raman Spectroscopy to verify the properties of MnO2. Two sets of sensors consist of as-prepared MnO2 and 200°C annealed MnO2 were tested towards H2 gas. The tapered optical fiber coated with Pd/MnO2 nanograins was found to be sensitive towards H2 with different concentrations in synthetic air at 240°C operating temperature. The annealed sensor showed higher response and sensitivity as compared to the as-prepared sensors when measured in the visible to near infra-red optical wavelength range. The absorbance response of the annealed Pd/MnO2 on fiber has increased to 65% as compared to 20% for the as-prepared Pd/MnO2 upon exposure to 1% H2 in synthetic air.