Abstract

A series of experiments, examining the confinement properties of ion cyclotron range of frequencies (ICRF) heated H mode plasmas, has been carried out on the Alcator C-Mod tokamak. Alcator C-Mod is a compact tokamak that operates at high particle, power and current densities at toroidal fields up to 8 T. Under these conditions the plasma is essentially thermal with very little contribution to the stored energy from energetic ions (typically no more than 5%) and with Ti~Te. Most of the data were taken with the machine in a single null `closed' divertor configuration with the plasma facing components clad in molybdenum tiles. The data include those taken both before and after the first wall surfaces were coated with boron, with emphasis on the latter. H modes obtained from plasmas run on boronized walls typically had a lower impurity content and radiated power and attained a higher stored energy than those run on bare molybdenum. Confinement enhancement, the energy confinement time normalized to L mode scaling, for discharges with boronized walls, ranged from 1.6 to 2.4. The unique operating regime of the Alcator C-Mod device provided a means for extending the tests of global scaling laws to parameter ranges not previously accessible. For example, the Alcator C-Mod edge localized mode (ELM)-free data were found to be 1.1 to 1.6 times the ITERH93 scaling and the ELMy data almost 2.0 to 2.8 times the ITERH92 ELMy scaling law, suggesting that the size scaling in both scalings may be too strong. While both ELM-free and ELMy discharges were produced, the ELM characteristics were not easily compared with observations on other devices. No large, low frequency ELMs were seen despite the very high edge pressure and temperature gradients that were attained. For all of our H mode discharges, a clear linear relationship between the edge temperature pedestal and the temperature gradient in the core plasma was observed; the discharges with the `best' transport barriers also showing the greatest improvement in core c

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.