Growth of Aligned Hexagonal ZnO Nanorods on FTO Substrate for Dye-Sensitized Solar Cells (DSSCs) Application

Abstract

This article reports a facile growth of well-crystalline aligned hexagonal ZnO nanorods on fluorine-doped tin-oxide (FTO) substrate via non-catalytic thermal evaporation process. The morphological investigations done by field-emission scanning electron microscope (FESEM) and transmission electron microscopy (TEM) reveal that the grown products are aligned hexagonal ZnO nanorods which are grown in a very high density over the whole substrate surface. The detailed structural properties observed by high-resolution TEM equipped with selected area electron diffraction (SAED) and X-ray diffraction (XRD) pattern confirmed that the synthesized nanorods are well-crystalline possessing wurtzite hexagonal phase and preferentially grown along the c-axis direction. A sharp and strong UV emission at 381 nm in room-temperature photoluminescence (PL) spectrum showed that the as-grown ZnO nanorods possess excellent optical properties. The as-grown nanorods were used as photo-anode for the fabrication of dye-sensitized solar cells (DSSCs) which exhibits an overall light-to-electricity conversion efficiency (ECE) of 0.7% with V(oc) of 0.571 V, J(sc) of 2.02 mA/cm2 and FF of 0.58.