Green and sensitive method combining ultrasonic solvent extraction, stir bar sorptive extraction and thermal desorption-gas chromatography–tandem mass spectrometry for determination of organotin compounds in sediment

Abstract

A method integrating ultrasonic solvent extraction (USE) and stir bar sorptive extraction (SBSE) with thermal desorption-gas chromatography–tandem mass spectrometry (TD-GC–MS/MS) was developed and validated for determining critical organotin compounds (OTCs)—tributyltin (TBT) and triphenyltin (TPhT)—in sediment. In preparing a 0.5 g sediment sample, two 1-min cycles of US bath solvent extraction (using equal parts CH3COOH and MeOH), were followed by derivatization with NaBEt4 in the presence of a methanolic-aqueous solution of CH3COONa and SBSE for 1 h, achieving analyte recoveries of 64–94 %. Matrix-matched internal standard calibration and the use of an isotopically labelled recovery standard corrected for analyte losses and matrix effect (ME), ensuring accurate results for triorganotins. However, the method was not suitable for mono- and diorganotins due to low and anomalous recoveries caused by ME. Miniaturizing and optimizing the sample preparation reduced chemicals use and waste, contributing to the method being deemed ’an excellent green analysis’ by the Analytical Eco-Scale assessment. The method achieved a limit of quantification (LOQ) of 0.081 ng g−1 and an expanded uncertainty (U) value of 15 % for TBT, meeting the environmental quality standards (EQS) criteria of the European Union Water Framework Directive. Its applicability was demonstrated through the analysis of actual sediment samples and natural matrix certified reference materials.