Contribution to the determination of tributyltin in water by stir bar sorptive extraction‒thermal desorption‒gas chromatography‒tandem mass spectrometry

Abstract

An environmentally friendly method was developed to determine tributyltin (TBT) in water at the levels required by the European Union Water Framework Directive (EU WFD) using stir bar sorptive extraction (SBSE) in combination with thermal desorption‒gas chromatography‒triple quadrupole tandem mass spectrometry. The main focus of the method development was on addressing some aspects of reducing blank values (minimizing the use of chemicals, glassware cleaning, pretreatment of sorptive stir bars) and optimizing the SBSE procedure variables (sample volume, polarity of sample solution, extraction time). The performance of the method was studied in terms of linearity, matrix effect, method limits and accuracy (precision and trueness) using MilliQ, tap and surface water. TBT quantification limit for the studied matrices ranged from 0.049 to 0.055 ng L‒1 and repeatability (RSD%, n = 10) and recovery at the environmental quality standard (EQS) concentration of 0.2 ng L‒1 were in the range of 6‒18% and 88‒107%, respectively, indicating good performance of the method. The matrix effect of river water (‒78%) and artificial seawater (‒83%) compared to MilliQ water showed the necessity to use a matrix-matched calibration when analysing TBT in surface water samples. The developed sample preparation was further evaluated for greenness using the recently introduced AGREEprep assessment, which revealed a much greener performance of the proposed method over the compared CEN/TS 16692 method. The method meets the requirements of the EU WFD and is suitable for monitoring, evaluation and classification of the chemical status of surface waters.