Abstract
The possibility to directly pattern indium-tin-oxide (ITO) layers at ambient conditions by printing has many benefits. Printing, being an additive process, would greatly reduce the amount of energy, labor and material used by the current manufacturing processes to deposit and pattern ITO. In this work, gravure printability of ITO nanoparticles on polyethylene terephthalate (PET) was studied. A wide range of sheet resistivites and film thicknesses was obtained by varying the specifications of the gravure cells. From the regression analysis of the results, a good estimation of sheet resistivity of the printed films at different gravure cell volumes and aspect ratios (AR) was achieved. The films also showed transparency above 95% in the visible light region. In addition, printed ITO films were assessed for mechanical flexibility and the results compared to commercially available sputtered ITO films on PET. The electrical performance of printed ITO layers was not deteriorated with bending in contrast to the sputtered films. Therefore, printed ITO films can be of great benefit for applications in flexible electronics such as organic photovoltaics (OPV), liquid crystal displays (LCD), organic light-emitting diodes (OLED), touch screens, biosensors and utilization in the field of energy efficiency, especially in buildings.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
