GPS/BDS precise point positioning with B2b products for high-rate seismogeodesy: application to the 2021Mw 7.4 Maduo earthquake

Abstract

SUMMARYPrecise point positioning (PPP) can measure ground motions with a centimetre-level accuracy using only one receiver. It has been widely used in earthquake monitoring and earthquake early warning (EEW) systems. However, traditional PPP highly depends on well-established and robust internet infrastructure for data communication. Along with the broadcast ephemeris, the orbit and clock corrections transmitted by the B2b signals of BeiDou Navigation Satellite System (BDS) can be used to recover the precise products of GPS and BDS. Since the B2b products, namely the satellite state parameter messages, are accessible even without internet infrastructure, PPP with B2b signals is more suitable for real-time applications. This study witnesses the application of PPP with B2b products in seismic monitoring for the first time. The shake table experiments demonstrate that PPP with B2b can reach a millimetre-level accuracy in horizontal in earthquake monitoring for GPS-only, BDS-only and GPS/BDS combination. The application to the 2021 Mw 7.4 Maduo earthquake shows that the accuracies of seismic displacements derived from GPS-only PPP with B2b products are 1.7, 2.4 and 1.7 cm in east, north and vertical components, compared with those from GPS-only PPP with final precise products. We therefore conclude that PPP with B2b products has a promising prospect in seismogeodesy and related applications such as EEW and rapid hazard response.