Abstract
In all working Saudi gold mines, ores are treated using the hazardous cyanidation process. Some Saudi gold ores, such as Al-Amar, is known to be refractory to cyanidation. In this work, we have examined the extraction of gold from Al-Amar gold ore by the much environmentally safer and efficient thiosulfate process. The run of mine (ROM) and carbon-in-leach (CIL) feed, that is obtained after separation of copper concentrate from ROM, samples were found to contain 6.5 and 3.6 ppm gold, respectively. The mineralogical microscopic investigations of ROM samples confirmed that fine gold specks were scattered and encapsulated inside sulfide or quartz base minerals. This could explain the expected reason of the difficult leaching of gold by cyanidation. The X-ray diffraction analysis showed that the CIL feed contained quartz, pyrite, sphalerite and chlorite minerals. After detailed leaching studies of CIL feed, almost 70% of gold could be extracted at 0.2 M ammonium thiosulfate and 0.3 M ammonium hydroxide after 24 h. Addition of copper(II) as <0.2 mM only slightly enhanced the gold leaching in the ammoniacal thiosulfate solution. Gold leaching drastically decreased as the concentration of copper(II) increased 0.2 mM due to the degradation of S2O3 2- .
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
