Abstract

The forced oscillation technique (FOT) measures respiratory resistance and reactance; however, the upper airways may affect the results. We quantified the impact of glottal aperture and buccal air leaks. In the glottal aperture study (1) 10 healthy subjects (aged 34 ± 2 years) performed a total lung capacity maneuver followed by 10-s breath-hold with and without total glottal closure and (2) the effects of humming (incomplete glottal narrowing) on FOT measurements were studied in six healthy subjects. Glottal narrowing was confirmed by direct rhinolaryngoscopy. In the air leak study, holes of increasing diameter (3.5, 6.0, and 8.5 mm) were made to the breathing filters. Eleven healthy subjects (aged 33 ± 2 years) and five patients with COPD (aged 69 ± 3 years) performed baseline FOT measurements with the three modified filters. Narrow glottal apertures and humming generated whole-breath resistance at 5 Hz (R5) peaks, increased R5 (1.49 ± 0.37 kPa/L/s vs 0.34 ± 0.01 kPa/L/s, P < .001), and decreased whole-breath reactance at 5 Hz (X5) values (-2.10 ± 0.51 kPa/L/s vs -0.09 ± 0.01 kPa/L/s, P < .001). The frequency dependency of resistance was increased. Holes in the breathing filters produced indentations on the breathing trace. Even the smaller holes reduced R5 in healthy subjects (0.33 ± 0.02 to 0.24 ± 0.02 kPa/L/s, P < .01) and patients with COPD (0.50 ± 0.04 to 0.41 ± 0.04 kPa/L/s, P < .05), whereas X5 became less negative (from -0.09 ± 0.01 to -0.05 ± 0.01 in healthy subjects, P < .01; from -0.22 ± 0.06 to -0.11 ± 0.03 kPa/L/s in patients with COPD, P < .05). Visual inspection of the data is required to exclude glottal narrowing and buccal air leaks identified as R5 peaks and volume indentations, respectively, because these significantly affect FOT measurements.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.