Abstract
Poly(ethylene carbonate) (PEC) is a form of aliphatic polycarbonate, a biodegradable polymer made via the copolymerization of carbon dioxide and epoxides. The poor thermal stability and mechanical properties of these aliphatic carbonates are attributed to the carbon structure's flexibility, which restricts their applications. By combining PEC with organoclay CP180, this study addressed the weaknesses of PEC with organoclay addition. A physical blending technique was employed to generate PEC/organoclay composites with a 10-50 wt.% ratio of organoclay. The blended material's thermal characteristics were analyzed using differential scanning calorimetry (DSC), and the mechanical characteristics were measured using a universal tensile machine. The Field Emission Scanning Electron Microscopy (FESEM) analysis determined the blends' morphology. Before the torque value for all curves grew with the addition of CP180 material to the PEC matrix, it became constant. It reached a high value due to the shear-thickening behavior of the PEC matrix with organoclay addition. Tg of PEC increased by more than 7°C by 40 wt.% organoclay addition, as evident in the hindrance of PEC flexibility, significantly increased the toughness of this PEC. From the FESEM images, the formation of large silicate starts to aggregate effectively, lowering the interfacial area between organoclay and PEC as the clay content continues to rise, as shown by 50 wt.% organoclay addition.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.