Abstract
A geometry factor is proposed for extracting the Mode I stress intensity factor from experimental data obtained during torsional loading of solid and tubular cylindrical specimens with a spiral crack on the surface. Using torque at fracture and specimens geometry as an input, the stress intensity factor at the corresponding fracture load was determined using a finite element analysis based on interaction integral method. The computed Mode-I stress intensity factor and the measured fracture load are used to quantify the geometry factor for different depths of spiral crack in cylindrical specimens following Benthem’s circumferential crack solution approach. The proposed model was validated by testing a polycarbonate specimen and compared it with a conventional three-point bending method. The difference between results from the proposed formula and the standard method was about 1.7% and 4.1% for solid and tubular specimens respectively. Furthermore, the fracture toughness value of different materials in the open literature was compared to the results recalculated by using the proposed formula. The result is in good agreement with different materials considered with a maximum difference of less than 6%.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
