Abstract

Measurements of small-scale [O (mm)] geometric roughness length ( $$ k_{\text{f}} $$ ) associated with surface foam generated by depth-limited breaking waves were obtained within the surf zone on a sandy beach. The parameter $$ k_{\text{f}} $$ is described using the vertical standard deviation of the sea surface elevation for a foamy area as estimated from stereo imagery. A waterproof two-camera system with self-logging and internal power was developed for collecting stereo images using commercial off-the-shelf components and commercial software for operations 1 m above the sea surface within the middle of the surf zone. The surf-zone foam had a mean $$ k_{\text{f}} $$ value of 3.2 mm, ranging from 1.7 to 6.3 mm. Using an empirical land-based relationship results in a mean aerodynamic roughness length for surf-zone foam of 0.82 mm, with a range from 0.4 to 1.6 mm, which provides a reasonable estimate of the surf-zone drag coefficient compared with field measurements.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.