Geoelectrical Exploration of Groundwater by Using Vertical Electrical Sounding Technique at Wadi Morra, South Sinai, Egypt

Abstract

Wadi Morra area is one of the most important areas targeted by the government for sustainable development. This development depends mainly on groundwater occurrences. This research aims to explore groundwater in this region, which depends on groundwater for its needs. To achieve this aim, the geoelectrical resistivity method was used, represented by Schlumberger Vertical Electrical Soundings (VESs). Seventeen VESs have been carried out with a maximum half current electrode spacing (AB/2) of 700m. The measured VESs are interpreted qualitatively and quantitatively to construct a geoelectrical model. To detect the water-bearing layers and their extensions, three geoelectric cross-sections in addition to a one-panel diagram were constructed using all the available data. Also, both true resistivity and isopach contour maps of waterbearing layers were created based on these data. The interpretation results indicate that there are five geoelectric layers (A, B, C, D, and E), two of them (C and D) are water-bearing layers. The first water-bearing layer is layer C, which represents the Nubian sandstone aquifer, and the second layer is layer D, which represents the fractured basement aquifer. These two aquifers were observed along the northern part of the Saint Catherine - Nuweiba road that dissects the Wadi Morra basin, while it is absent at the southern part of this road. It is due to the presence of a few faults. According to groundwater occurrences, the study area was divided into two zones. The first zone is zone (A) where the groundwater is present, either in the Nubian sandstone aquifer or in the fractured basement aquifer and the second zone is zone (B) where there is no groundwater at all due to the presence of basement rocks at a few depths. This research also recommends that the best places for drilling productive wells be at zone A.