Geochemical effects of oxidation products and framboidal pyrite oxidation in acid mine drainage prediction techniques

Abstract

Acid mine drainage predictive testwork associated with the Australian Mineral Industries Research Association (AMIRA) P387A Project: Prediction and Kinetic Control of Acid Mine Drainage (AMD) has critically examined static acid assessment and kinetic information from acid–base accounting techniques, including net acid production potential (NAPP), net acid generation (NAG) and column leach tests. This paper compares results on two waste rock samples that were obtained from the Kaltim Prima Coal mine (KPC) containing significant quantities of fine-grained framboidal pyrite. In agreement with other research, the authors' results indicated that framboidal pyrite is more reactive than euhedral forms due to the greater specific surface area of framboidal pyrite. This is evidenced by optical microscopy of reacted samples. Importantly, the results showed that NAPP testing is biased by the rapid acid generating oxidation of framboidal pyrite prior to, and during the acid neutralisation capacity (ANC) test. This can result in negative ANC values for samples containing significant framboidal pyrite (often “corrected” to zero kg H 2SO 4/t) when significant ANC is actually present in the sample. NAG testing using H 2O 2 indicated that samples containing a significant quantity of framboidal pyrite can result in the catalytic decomposition of the H 2O 2 prior to complete oxidation of the sulfide minerals present, requiring sequential addition of H 2O 2 for completion. A benefit of the NAG test, however, is that it assesses the net acid generation capacity of the sample without bias towards acid generation as is observed using NAPP methods. The kinetic NAG test also gives information on the reaction sequence of framboidal and euhedral pyrite. Periodic (kinetic) analysis of sub-samples from column leach tests indicated rapid oxidation of the framboidal pyrite compared to the euhedral pyrite, which was correlated with the greater framboidal pyrite surface area. Calculations to determine the sulfide/sulfate acidity derived from the oxidation of framboidal pyrite prior to; and during the ANC test have been developed to provide a better indication of the actual ANC (ANC Actual) of the sample. Paste pH values of <pH 4–5 may be one suitable trigger mechanism for the implementation of this new method. This has led to an improved NAPP estimation of total acid production. Together with NAG and column leach testing this improved methodology has resulted in accurate AMD characterisation of samples containing acidic oxidation products and framboidal pyrite.