Abstract

The Volcanic-related Be-U-Mo Baiyanghe deposit is located in the Paleozoic Xuemisitan Volcanic Belt in West Junggar (NW China). It is the largest Be deposit in Asia which is dominantly hosted in late Devonian rhyolitic tuff and in the late Carboniferous Yangzhuang granite (313 ± 2 Ma) that were emplaced after the closure of the Junggar oceanic domain. The late Devonian rhyolitic tuff is a strongly fractionated peralkaline A1-type volcanic rock with a major magmatic enrichment in Nb, Y, Th, Be, Ta and U. Highly fractionated REE patterns and significant concentrations of Pb, Nb, Zr, Y, Th and Ta in the primary U mineralisation identified these tuffs as the dominant U and probably Be source for Be-U ore genesis in West Junggar. The primary high U concentrations (6.5 < Umean < 15.0 ppm) were released through volcanic glass devitrification and mobilised by oxidising fluids for the formation of hydrothermal mineralisation. The Yangzhuang granite is to the contrary a moderately fractionated moderate- to high-K calc-alkaline A2-type granite characterised by low magmatic U and Be enrichment (Umean = 2.9 ppm; Bemean = 4.7 ppm), and thus constituted a minor U source for the mineralisation as demonstrated by U release and remobilisation from metamict U-bearing accessory minerals.In the Baiyanghe deposit, structurally-controlled primary U mineralisation was temporally constrained by an in situ U-Pb isotopic minimum crystallisation age of 240 ± 7 Ma on pitchblende. This event represents the hydrothermal stage of U mineralisation that occurred during the early Permian–middle Triassic post-accretion event in West Junggar and paragenetically postdates the Be ore stage (ca. 303–265 Ma). The hydrothermal U mineralisation is mainly characterised by Pb-Nb-Ti-Zr-Mo-rich pitchblende veins associated with calcite and quartz, which crosscut Be-stage fluorite veins. During this episode of crustal extension, the Be-U-Mo ore therefore formed in a two-stage hydrothermal model within the same mineralising event: (i) oxidising meteoric and possibly basinal waters percolated downward into the basement through structures and mixed with CO2-bearing magmatic fluids derived from early generations of mafic dykes that intruded the host rocks in the Baiyanghe area. During the circulation of these thermal solutions along faults and fractured zones, Be was leached mainly from the Devonian rhyolitic tuff during hydrothermal alteration and dominantly transported as fluoride complexes in the fluids. These low-temperature (130–150 °C) ore solutions then reacted with Ca-rich minerals of the host rocks, which resulted in a pH increase that triggered fluorite precipitation in turn promoting Be deposition as bertrandite; and (ii) in a second stage, additional oxidising surface-derived fluids including meteoric waters and possibly basinal brines infiltrated the basement. U was also leached mainly from the late Devonian rhyolitic tuff and likely transported as chlorine and/or uranyl carbonate complexes in the fluids. U precipitated as pitchblende due to fO2 decrease when these low-temperature (120–125 °C) oxidising U-bearing solutions encountered favourable reducing environments mainly represented by dolerite and diabase dykes crosscutting the host rocks and/or carbonaceous shales at the contact with the Devonian rhyolitic tuff. Pitchblende then locally experienced dyke-emplacement related post-ore hydrothermal potassic alteration characterised by abundant illite crystallisation, significant Si gain and in situ relative enrichment of Nb, Ti, Th, and Ta due to strong U and Pb depletion. The primary U mineralisation was then largely oxidised into uranophane due to supergene alteration related to further meteoric water infiltration during late Mesozoic–Cenozoic crustal extension in West Junggar.The characteristics of the volcanic-related hydrothermal Be-U mineralisation in the Baiyanghe deposit show key similarities with Streltsovka (U-Mo-F) and Spor Mountain (Be-U) world-class districts, although Baiyanghe has much smaller resources than the ones in Streltsovka.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.