Abstract
Based on the requirements in industry, there is a need to design a low-cost robotic platform which is to be operated remotely through the gripper and control data. This should facilitate in avoiding human involvement in continuous and heavy environments. Kinematic analysis is one of the most important tasks in design of a manipulator. It involves many tasks like mathematical modeling of the manipulator using forward or inverse kinematics. Forward kinematics involves defining the target point or reach point using the joint angles (if it is rotary joint) and coordinates of the joint if it is prismatic joint. Inverse kinematics involves finding out the different possible ways of the joints to reach the given target point. Hence inverse kinematics yields more than one solution for a given target position of an end effectors, thereby it becomes more tedious task to calculate all the possible solutions manually. In this paper Matlab software is used for solving the forward kinematic analysis to calculate the possible joint link parameters to reach the target point using generalized programming.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Innovative Technology and Exploring Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.