Gaussian beam imaging of fractures near the wellbore using sonic logging tools after removing dispersive borehole waves

Abstract

The ability to image near-wellbore fractures is critical for wellbore integrity monitoring as well as for energy production and waste disposal. Single-well imaging uses a sonic logging instrument consisting of a source and a receiver array to image geologic structures around a wellbore. We use cross-dipole sources because they can excite waves that can be used to image structures farther away from the wellbore than traditional monopole sources. However, the cross-dipole source also will excite large-amplitude, slowly propagating dispersive waves along the surface of the borehole. These waves will interfere with the formation reflection events. We have adopted a new fracture imaging procedure using sonic data. We first remove the strong amplitude borehole waves using a new nonlinear signal comparison method. We then apply Gaussian beam migration to obtain high-resolution images of the fractures. To verify our method, we first test our method on synthetic data sets modeled using a finite-difference approach. We then validate our method on a field data set collected from a fractured natural gas production well. We are able to obtain high-quality images of the fractures using Gaussian beam migration compared with Kirchhoff migration for the synthetic and field data sets. We also found that a low-frequency source (around 1 kHz) is needed to obtain a sharp image of the fracture because high-frequency wavefields can interact strongly with the fluid-filled borehole.