Abstract
SummaryGate‐level body biasing provides an attractive solution to increase speed and robustness against process and temperature variations while maintaining energy efficiency. In this paper, the behavior of basic logic gates, designed according to the proposed design technique, is analytically examined with the main purpose of furnishing important guidelines to design efficient subthreshold digital circuits. Our modeling has been fully validated by comparing the predicted results with SPICE simulations performed for a commercial 45‐nm complementary metal oxide semiconductor technology. Considering process, temperature and loading capacitance variations, the delay of an inverter is predicted with a maximum error lower than 16.5%. Even better results are obtained when our modeling is applied to more complex logic gates. Under process, loading capacitance and temperature variations, the delay of NAND2 and NOR2 logic gates is always predicted with an error below 10%. Good agreement between the predicted and simulated results makes our modeling a valuable support during the circuit design phase. Copyright © 2014 John Wiley & Sons, Ltd.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Circuit Theory and Applications
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.